What is the use gas per hour of gas boilers?
2022-03-30 15:00:52
In addition to purchasing high-efficiency gas-fired boiler equipment, it is also possible to reduce the energy consumption of gas-fired boilers by daily adjusting the operation mode of the boiler, thereby saving the operating cost of the boiler and saving the investment in the boiler for enterprise users.
To reduce the energy consumption of gas boiler operation, we can start from two aspects: adjusting the operation mode of the boiler and daily maintenance of the boiler.
1. Adjust the operation mode of the gas boiler
1. When the load of the boiler unit changes, adjust the air volume and the operation mode of the pulverizing system in time to maintain the most suitable excess air coefficient in the furnace.
2. Adjust the inlet valve of the water seal tank at the bottom of the furnace in time to ensure the proper water level of the water seal tank.
3. When the coal quality changes, adjust the combustion in time to ensure that the combustion is complete and the center of the furnace flame is appropriate.
4. Regularly carry out soot blowing and slag removal on the heating surface to keep the heating surface clean.
5. Maintain a suitable flue gas flow rate and reduce the ash on the heated area of the tail.
6. Check the opening of the auxiliary air valve of the burner every shift to ensure that there is enough oxygen for combustion.
7. Increase the water temperature.
2. Daily maintenance of gas boilers
1. Carry out a combustion optimization adjustment test to determine which fuel has a higher combustion rate under different fuel types.
2. Regularly test the fineness of pulverized coal, and adjust and deal with any abnormality in time.
3. Regularly carry out the air leakage test of the air preheater to eliminate the air leakage of the air preheater in time.
4. Always check the furnace to see the fire hole, furnace wall and furnace bottom water seal. If any problem is found, block it in time to reduce the air leakage of the boiler body.
5. Strengthen the daily maintenance of the boiler soot blowing, check the cleanliness of the boiler through the system, and regularly check and clean the soot inside the boiler by the stoker.
To reduce the energy consumption of gas boiler operation, we can start from two aspects: adjusting the operation mode of the boiler and daily maintenance of the boiler.
1. Adjust the operation mode of the gas boiler
1. When the load of the boiler unit changes, adjust the air volume and the operation mode of the pulverizing system in time to maintain the most suitable excess air coefficient in the furnace.
2. Adjust the inlet valve of the water seal tank at the bottom of the furnace in time to ensure the proper water level of the water seal tank.
3. When the coal quality changes, adjust the combustion in time to ensure that the combustion is complete and the center of the furnace flame is appropriate.
4. Regularly carry out soot blowing and slag removal on the heating surface to keep the heating surface clean.
5. Maintain a suitable flue gas flow rate and reduce the ash on the heated area of the tail.
6. Check the opening of the auxiliary air valve of the burner every shift to ensure that there is enough oxygen for combustion.
7. Increase the water temperature.
2. Daily maintenance of gas boilers
1. Carry out a combustion optimization adjustment test to determine which fuel has a higher combustion rate under different fuel types.
2. Regularly test the fineness of pulverized coal, and adjust and deal with any abnormality in time.
3. Regularly carry out the air leakage test of the air preheater to eliminate the air leakage of the air preheater in time.
4. Always check the furnace to see the fire hole, furnace wall and furnace bottom water seal. If any problem is found, block it in time to reduce the air leakage of the boiler body.
5. Strengthen the daily maintenance of the boiler soot blowing, check the cleanliness of the boiler through the system, and regularly check and clean the soot inside the boiler by the stoker.
Consultation
